GearLite - Digital Video - Distribution and Monitoring

CMA-9011-R
SDI Component Monitoring Amplifier with Reclocked Outputs
RossGear CMA-8011 performance and quality, in a smaller package.
$475.00 USD

• NTSC, PAL or PAL-N operation
• 10-bit DAC
• 8-bit data processing
• 2 low noise analog outputs
• Reclocked Outputs availaible with CMA-9011-R Only
• Excellent input equalization (> 250m)
• Color bar test signal with valid SDI input
• 5V universal adapter with locking DC connector
• Small brick form factor
• Status LED
• Excellent I/O specifications
• 3-year warranty

Serial Video Input
Number of Inputs:		1
Signal Standards Accomodated:		SMPTE 259M (conversion at 270Mb/s only)
Input Impedence:		75 ohm terminating
Input Return Loss:		>19dB to 270MHz
Equalization:		Automatic, up to 26dB (250m of Belden 8281 cable) @270Mb/s

Serial Video Output
Number of Outputs:		4
Signal Standards Accomodated:		SMPTE 259M
Output Impedence:		75 ohm
Output Return Loss:		>20dB to 270MHz
Signal Level:		800mV +/-10%
DC Offset:		<+/- 50mV
Rise & Fall Time:		>750pS typical (20-80%)
Overshoot:		<7% typical
Outputs Short Circuit Protected:		Yes
Propagation Delay:		>14ns

Analog Monitoring Output
Number of Outputs:		2
Video:		Composite Analog Video
Output Impedence:		75 ohm
Output Return Loss:		>45dB to 6MHz
Output Isolation:		>44dB to 6MHz
Signal Level:		1Vpp nominal
DC Offset for RGB or Composite Video:		<+/- 50mV
Frequency Response:		+/-0.25dB to 5MHz typically -1dB @ 5.75MHz
Differential Phase:		<1%
Differential Gain:		<1degree
Outputs Short Circuit Protected:		Yes
RMS Noise (unweighted):		-53dB 0 - 5.0MHz

Power Consumption
Required Voltage:		+5 V DC (5% regulation)
Current Consumption:		>425 mA typical
Total Power:		>2.2W typical

Specifications and design are subject to change without notice.