RossGear - Switches

AVS-8064 - Leitch Compatible
AES/Analog Video Dual 2x1 or 4x2 Switcher
A cost effective solution for switching between 2 or 4 unbalanced AES audio or analog video signals.

• AES audio or analog video
• Two switches on one module
• Dual 2x1 or 4x2 modes
• GPI or panel control
• Modular assignable remote control modules available
• Vertical interval switching
• Modules can control 10 switches
• Clamping mode for video on all inputs
• Selection indicators front of card
• 5 year transferable warranty
• Fits Ross 8000 Series and Leitch 6800 Series frames
• Total Watts 2.0
• Remote Control Modules Option

Input
Number of Inputs:		4
Type:		Analog Video or unbalanced AES Audio
Input Level:		1 V pp
Input Impedence:		75 Ohms terminating
Input Return Loss:		>40 dB to 5MHz

Output
Number of Outputs:		1 (2 on first switch)
Output Impedence:		75 Ohm
Output Return Loss:		>40 dB to 5 MHz
Output Isolation:		>42 dB to 5MHz
DC Offset:		<50mV
GPI Inputs Impedence:		10K Ohms

Performance
Gain:		Unity
Gain Stability:		<0.1% per 10 degrees C
Frequency Response:		+/- 0.04 dB to 10MHz typically
Line Rate Window Tilt:		<0.2%
Field Rate Window Tilt:		<0.2%
50/60Hz Square Wave Tilt:		<0.1%
Bounce (black to white):		<0.5%
Differential Gain (10%-90% APL):		<0.2%
Differential Phase (10%-90% APL):		all outputs loaded: <0.2 degrees
Channel to Channel Crosstalk:		>-68 dB RMS @ 3.58MHz any case
RMS Noise 0-5MHz (unweighted):		>65 dB to 5MHz
Chrominance/ Luminance Delay:		<2.0 ns
K Rating 1 T:		0.3%

Others
Power Consumption:		2.0 W

Specifications and design are subject to change without notice.

Remote Control Modules Options