RossGear - Converters

DAC-8013A - Leitch Compatible
SDI to Analog Component Converter
10 bit quality conversion of 270 Mb serial component 4:2:2 video to an analog component format in order to feed Beta recorders, RGB monitors or other analog component equipment.

• RGB and YPrPb color spaces are supported
• Betacam, SMPTE/EBU N10 and MII** component modes
• Separate high-level sync or composite output
• 10-bit processing and conversion
• Distribution amplifier with one re-clocked serial output
• Sync may be added to the RGB signals
• 525/625 line operation
• Fault Reporting (SMPTE 269M format)
• Input cable equalization for 200 meters of cable
• 10 modules fit into a 2 RU frame
• Fully compatible with Leitch 6800 series frames
• 5-year transferable warranty
• An interchangeable alternative to the Leitch DAC-6801 amplifier
• Fits Ross 8000 Series and Leitch 6800 Series frames
• Total Watts <4.0

Serial Video Input
Standard:		SMPTE 259M-C; 270Mb/s, 525/625 lines
Input Impedence:		75 Ohm
Return Loss:		>22dB to 300MHz
Common Mode Rejection:		10V pp to 10KHz
Equalization:		Automatic, up to 34dB

Serial Video Output
Number of Outputs:		1
Standard:		SMPTE 259M-C; 270Mb/s, 525/625 lines
Output Impedence:		75 Ohm
Output Return Loss:		>20dB to 300MHz
Signal Level:		800mV +/- 10%
DC Offset:		+/- 0.5V
Rise & Fall Time:		700pS (20 - 80%)
Overshoot:		<10%

Component Video Outputs
Number of Outputs:		2 sets Component Video
Format (525/625 lines):		RGB, Betacam, Mii, SMPTE/EBU N10
Output Level:		as above standards
Output Impedence:		75 Ohm
Output Return Loss:		>35dB to 5MHz
DC Offset:		+/- 50mV
Frequency Response:		+/- 0.05dB to 5MHz
Quantizing:		10 bits

Sync Output
Number of Outputs:		1
Output Level:		2V pp or 4V pp, selectable
Output Impedence:		75 Ohm
Output Return Loss:		>35dB to 5MHz
Rise and Fall Time:		100ns

Other
Power Consumption:		3.5W

Specifications and design are subject to change without notice.