RossGear - Converters

DAC-8016A - Leitch Compatible
SDI to Analog Composite Converter

DAC-8016A-S - Leitch Compatible
SDI to Analog Composite Converter with Frame Synchronizer

DAC- 8016A-X - Leitch Compatible
SDI to Analog Composite Converter with Cross Color Reduction (NTSC)

DAC- 8016A-SX - Leitch Compatible
SDI to Analog Composite Converter with Cross Color Reduction & Frame Synchronizer

• Automatic standard detection- NTSC or PAL
• SDI Input (SMPTE-259M-C)
• Four analog composite outputs
• 1 or 2 reclocked SDI outputs
• Frame Synchronizer (on "-S" versions)
• Extensive proc amp controls
• Heads-Up Video Overlay Display
• Comlink Data Port Display
• Cross color reduction Filter for removal of color artifacts
• All signal processing performed in the digital domain
• 12-bit output quantizing with 2x oversampling
• Programmable Vertical Interval (in half-line steps)
• Superblack is passed
• SMPTE 256M fault reporting
• 300ft. output video cable equalizer maintains quality to destination
• Low power consumption
• Single card solution on a DA-sized card
• 5 year transferable warranty
• Fits Ross 8000 Series and Leitch 6800 Series frames
• DAC-8016A (all models) Total Power 6.8W

Serial Video Input
Standard:		SMPTE 259M-C; 270Mb/s, 525/625 lines
Input Signal:		10 bits
Input Impedence:		75 Ohm
Return Loss:		>22dB to 270MHz
Common Mode Rejection:		4.5V pp @ 50/60Hz
Equalization:		Automatic, up to 26dB (250m)

Composite Outputs
Number of Outputs:		4
Standard:		NTSC or PAL composite video 1V pp, 75 Ohm
Output Return Loss:		>45dB to 5MHz
Output Isolation:		>48dB to 5MHz
Signal Level:		1V pp +/- 5%
DC Offset:		+/- 50mV
Output Equalization:		0 tp 300 feet

Analog Reference
Signal Standards:		NTSC, PAL
Input Impedence:		75 Ohms
Return Loss:		>40dB to 5MHz

Performance
Frequency Response:		+/- 0.1dB to 5.0MHz -0.2dB at 5.5MHz
Field and Line Tilt:		<0.5%
Differential Phase:		<0.5 degrees
Differential Gain:		<0.7%
Subcarrier Jitter:		<0.5 degrees
Group Delay:		+/- 10ns to 5MHz
RMS Noise (unweighted):		-62dB to 5MHz
Output Quantizing:		12 bits
H and V phasing:		infinite with frame sync - 2 lines without frame sync

Minimum Delay in Line Delay Mode
8016 NTSC:		20.3us
8016 PAL:		20.4us
8016-X NTSC:		1 line + 23.3us
8016-X PAL:		20.4us
8016-S NTSC:		20.3us
8016-S PAL:		20.4us
8016-SX NTSC:		1 line + 23.3us
8016-SX PAL:		20.4us

Other
Power Consumption:		7.2W

Specifications and design are subject to change without notice.