Downloads
Manual (PDF)
Catalog Page (PDF)
Power Supply
RossGear - Distribution and Monitoring
DFR-8104A - Leitch Compatible
Digital Product Frames & Power Supply
Accommodates 4 modules in 1 rack unit.
- DFR-8104A accommodates 4 modules in 1 rack unit
- Heavy-duty door hinges
- Durable powder-coat paint finish
- Aluminum construction for increased heat dissipation and weight reduction
- Master Reference Input feeds for all module slots
- Power Switch is accessible from front of rack frame
- Universal Power Supply (PS-8102) for all world standards (85-264 volts)
- PS-8102 sustains a 100ms incoming power glitch while maintaining full output power
- Power factor corrected supply with power fail detection circuit
- Separate power cords to each supply for power redundancy
- PowerLock cord retainer mechanism guards against accidental power loss
- Optional Cooling Fan Module for increased ventilation
- Fan Fail and Error Indicator LED's on front of frame (available with optional Cooling Fan Module)
- 5 year transferable warranty
- Accept Ross 8000 series and Leitch 6800 series video modules
| Power Supplies | ||
| Input Voltage: | 85-264 VAC 50/60Hz | |
| Input Power: | Max 2RU frame 130W | |
| Output Voltage: | +/-6.7V | |
| Output Current: | 13A max @ +6.7V 4A max @ -6.7V Note: the sum of both outputs not to exceed 13A |
|
| Output Power Available: | 80W | |
| Line Regulation: | 250mV change over full input range | |
| Output Ripple: | <60mVpp | |
For safety reasons, Ross power supplies do not fit into rack frames of other manufacturers. |
||
| Rack Frame Mechanical | ||
| Height: | DFR-8104: 1.75" (44mm) DFR-8110: 3.5" (88mm) |
|
| Width: | 19" (483mm) | |
| Depth: | 13" (330mm) | |
| Weight: (average with all amplifiers installed) |
DFR-8104: approx. 7.9lbs. (3.58kg) DFR-8101: approx. 13lbs. (5.9kg) |
|
| Environmental | ||
| Equipment is designed to operate in ambient temperature ranges from: | 0 to 40 degrees C | |
| Humidity: | <95% non condensing | |
| Total Module Power* | ||
| DFR-8104A*: | 16W non-ventilated (1RU frame) | |
| DFR-8104A-C*: | 40W ventilated (1RU frame) | |
| DFR-8110A*: | 40W non-ventilated (2RU frame) | |
| DFR-8110A-C*: | 80W ventilated (2RU frame) | |
*Important Note: The power dissipation of each product installed in this frame is indicated in the Specifications section of the documentation provided with each module. For long-term reliability and increased product life, it is recommended that the total dissipation of all modules installed in a DFR series frames should not exceed the Total Module Power indicated. In addition, non-ventilated frames may require one rack unit of empty space above and below for each frame for ventilation. Refer to the DFR series User Manual for complete details.
Specifications and design are subject to change without notice.
¬ RossGear
¬ openGear
¬ GearLite
¬ GearLite MD