RossGear - Switches

DSS-8024 - Leitch Compatible
Dual Serial 2x1 or 4x2 Switcher
A flexible and economical solution for switching between 2 or 4 serial digital signals.

• Supports 143, 177, 270 and 360 Mbps
• Two switches on one module
• Dual 2x1 or 4x2 modes
• GPI or panel control
• Modular assignable remote control modules available
• Vertical interval switching timed to external analog reference
• Automatic input cable equalization
• Modules can control 10 switches
• Input presence and selection indicators
• 5 year transferable warranty
• Fits Ross 8000 Series and Leitch 6800 Series frames
• Total Watts 3.8
• Remote Control Modules Option

Serial Video Input (per channel)
SMPTE Signal Standards Accomodated:		143 Mb/s, NTSC Composite 177 Mb/s, PAL Composite 270 Mb/s, 525/625 Component 360 Mb/s, 525/625 Component (widescreen)
Number of Inputs:		4
Impedence:		75 Ohms
Return Loss:		>20 dB @ 360MHz
Equalization:		Automatic up to 21 dB (200 m of 8281 @ 270Mb/s)

Serial Video Output (per channel)
Number of Outputs:		1 (2 on first switch)
Impedence:		75 Ohm
Return Loss:		>18 dB to 360MHz
Signal Level:		800 mV +/- 10%
Rise & Fall Time:		appox. 800ps (20-80%)650 ps (20-80%) typical
Overshoot:		<8%

Others - Ref Inpt (O/P 3 if used)
Impedence:		75 Ohms
Return Loss:		>40 dB to 6MHz
REF Input Level:		1 V pp nominal or 2 V or 4 V sync pulse
Power Consumption		3.8 W

Specifications and design are subject to change without notice.

Remote Control Modules Options