RossGear - Distribution and Monitoring

UDA-8005 - Leitch Compatible
Analog Utility Distribution Amplifier
Very useful in digital systems where there is also a requirement for the distribution of a few analog signals.

• 8 outputs
• Wide gain range of + 6dB to -2dB
• Economical cost
• Low distortion
• Excellent technical specifications
• 5 year transferable warranty
• An interchangeable alternative to the Leitch VDA-6830 amplifier
• Fits Ross 8000 Series and Leitch 6800 Series frames
• Total Watts 0.6

Input
Video Input Level:		1V pp
Pulse Input Level:		2V or 4V pp
Input Impedence:		75 Ohm terminating
Input Return Loss:		46dB to 5MHz

Outputs
Number of Outputs:		8
Output Impedence:		75 Ohm
Output Return Loss:		35dB to 5MHz
Output Isolation:		34dB to 5MHz
DC Offset:		<30mV
Output Loading per Termination at 10MHz:		0.01dB

Clamping
Normally DC coupled
May be AC coupled by installing two capacitors

Performance
Gain Range:		+3dB to -1dB
Gain Stability:		<0.1% per 10 degrees C
Frequency Response:		+/- 0.05dB to 10MHz typically -0.5dB at 20MHz
Delay:		7.2ns (9.3 degrees at 3.58MHz) (11.5 degrees at 4.43MHz)
Bandwidth:		-3dB 36MHz
Line Rate Window Tilt:		<0.2%
Field Rate Window Tilt:		<0.2%
50/60Hz Square Wave Tilt:		<0.1%
Bounce (black to white):		<0.1%
Differential Gain (10%-90% APL):		<0.1%
Differential Phase (10%-90% APL):		all outputs loaded: <0.1 degrees
RMS Noise 0-5MHz (unweighted):		68dB
Chrominance/ Luminance Delay:		<2.0ns
K Rating 1 T:		0.3%

Others
Power Consumption:		1.6W

Specifications and design are subject to change without notice.