RossGear - Distribution and Monitoring

UMA-8017 - Leitch Compatible
SDI Universal Monitoring Amplifier
A flexible and cost effective single card solution for the distribution and monitoring of 4:2:2 serial digital component signals.

• Converts 270 Mb/s serial digital input to RGB component and NTSC/PAL composite video
• RGB output available with sync on green
• NTSC/PAL composite video output or separate high level sync output (2V or 4V) available
• Four re-clocked serial digital outputs
• Auto re-clocking of 143, 177, 270 and 360 Mb/s digital video signals
• Advanced interpolation provides a 10 bit composite video output
• 5 year transferable warranty
• Fits Ross 8000 Series and Leitch 6800 Series frames
• Total Watts 4.5

Serial Video Input
Standards:		SMPTE 259M-C; 270Mb/s, 525/625 lines. Also supports 143, 177 and 360Mb/s rates.
Input Impedence:		75 Ohm terminating
Return Loss:		>22dB to 300MHz
Common Mode Rejection:		10V pp to 10KHz
Equalization:		Automatic, up to 26dB (250m of Belden 8281)

Serial Video Output
Standards:		SMPTE 259M-C; 270Mb/s, 525/625 lines. Also supports 143, 177 and 360Mb/s rates.
Number of Outputs:		4
Output Impedence:		75 Ohm terminating
Output Return Loss:		>20dB @ 300MHz
Signal Level:		800mV +/- 10%
DC Offset:		<+/- 0.5V
Rise & Fall Time:		>800pS typical (20-80%)
Overshoot		<10%

Component Video Outputs
Component Video Format:		RGB (Sync on Green or separate Sync)
Number of Outputs:		1 set
Impedence:		75 Ohm
Return Loss:		>35dB to 5MHz
DC Offset:		+/-50mV
Frequency Response:		+/-0.2dB to 4.5MHz
Luminance:		-0.8dB @ 5MHz
D/A Conversion		9 bits

Composite Video Output
Number of Outputs:		1
Impedence:		75 Ohm
Return Loss:		>35dB to 5MHz
DC Offset:		+/- 50mV
Frequency Response:		+/-0.2dB to 4.5MHz -0.6dB @ 5.5MHz
Internal Quantizing		8 bits
D/A Conversion		10 bits
Differential Phase		<1.2 degrees
Differential Gain		<1.8%
RMS Noise (unweighted)		-53dB to 5MHz

Others
Power Consumption:		4.5W

Specifications and design are subject to change without notice.