Quick Specs
Downloads
Manual (PDF)
Catalog Page (PDF)
RossGear - Analog Video
VFR-7210 - Leitch Compatible
VFR-7510 - GVG Compatible
Video DA Mounting Frames
Accommodates 10 modules in 2 rack units.
VFR-7210 - Leitch Compatible
- Accommodates 10 modules in 2 rack units
- High efficiency power supplies are cooler running
- Power switch and fuse is accessible from front of rack frame
- Sufficient power for high current third party boards
- 8 outputs per amplifier
- Aluminum construction for increased heat dissipation
- Removable frame door for accessibility
- Redundant power supply
- Separate power cords for each redundant power supply
- PowerLock cord retainer mechanism guards against accidental power loss
- Universal power supply PS-7103 (85-250V)
- Optional module extender for servicing
- Frame Support Bracket available to anchor rear of frames
- Optional Card Retaining Bracket for mobile installations
- 5 year transferable warranty
- Frames also accepts Leitch 680 Series distribution amplifiers
| Power Supplies | ||
| Input Voltage: | 85-250 V 50/60Hz | |
| Input Power: | 70 Watts, fully loaded | |
| Output Voltage: | 13.5 V fully loaded | |
| Output Current: | 1.7 A maximum continuous | |
| Module Power Available: | 4.5W | |
| Line Regulation: | > 350mV change over full input range | |
| Output Ripple: | <60mVpp | |
For safety reasons, Ross power supplies do not fit into rack frames of other manufacturers. No fear of accidental power loss with the Ross Powerlock cord retainer. |
||
| Rack Frame Mechanical | ||
| Height: | VFR-7210: 1.75" (44mm) VFR-7214: 3.5" (88mm) |
|
| Width: | 19" (483mm) | |
| Depth: | 11" (280mm) | |
| Weight: (average with all amplifiers installed) |
VFR-7210: approx. 11lbs. (5.1kg) VFR-7214: approx. 18lbs. (8.1kg) |
|
Specifications and design are subject to change without notice.
VFR-7510 - GVG Compatible
- Accommodates 10 modules in 2 rack units
- High efficiency power supplies are cooler running
- Power switch and fuse is accessible from front of rack frame
- Sufficient power for high current third party boards
- 8 outputs per amplifier
- Aluminum construction for increased heat dissipation
- Removable frame door for accessibility
- Redundant power supply
- Separate power cords for each redundant power supply
- PowerLock cord retainer mechanism guards against accidental power loss
- Universal power supply PS-7103 (85-250V)
- Optional module extender for servicing
- Frame Support Bracket available to anchor rear of frames
- Optional Card Retaining Bracket for mobile installations
- 5 year transferable warranty
- Frames also accepts GVG 8500/8800 Series distribution amplifiers
| Power Supplies | ||
| Input Voltage: | 85-250 V 50/60Hz | |
| Input Power: | 60 VA, fully loaded | |
| Output Voltage: | +/- 13.5 V | |
| Output Current: | 1.7 A maximum continuous | |
| Output Power: | 46 Watts | |
| Module Power Available: | 45W | |
| Line Regulation: | 350mV change over full input range | |
| Output Ripple: | <60mVpp | |
For safety reasons, Ross power supplies do not fit into rack frames of other manufacturers. No fear of accidental power loss with the Ross Powerlock cord retainer. |
||
| Rack Frame Mechanical | ||
| Height: | VFR-7510: 3.5" (88mm) VFR-7514: 1.75" (44mm) |
|
| Width: | 19" (483mm) | |
| Depth: | 13" (330mm) | |
| Weight: (average with all amplifiers installed) |
VFR-7510: approx. 13lbs. (5.9kg) VFR-7514: approx. 7.4lbs. (3.35kg) |
|
Specifications and design are subject to change without notice.
Sub Navigation
¬ RossGear
¬ openGear
¬ GearLite
¬ GearLite MD