Digital Production Switchers - Synergy 100 SD
Software Upgrades
From time to time, we release new Synergy software with cool new features. Simply follow the links at the bottom of the page to download the latest version - free.
Each software upgrade package contains:
- Software Upgrade files, and
- an Upgrade Instructions.pdf that gives detailed step-by-stepinstructions and change information, and can serve as an addendum to your current manual.
If you don't have a copy of Acrobat Reader, we can email or fax you the information before you proceed.
Along with your new software, you may want new manuals. They are available upon request and can be ordered in one of two forms - a printed copy is available at standard prices, but if you'd prefer a .pdf electronic copy, a complimentary version on CD is available. For CD copies, a small shipping and handling charge will apply. In either case, to order your new manuals contact Ross Video Technical Support via email at techsupport@rossvideo.com, by telephone at (613)652-4886, or by fax at (613)652-4425.
Note: DON'T START THE UPGRADE PROCESS AN HOUR BEFORE YOU NEED TO GO TO AIR, if at all possible. While we've made every effort to make the process smooth and maintain compatibility, we may have "tweaked" a feature that you use. Leave time to verify that your installation and memories are still working the way you intended. Some effects, especially Squeeze & Tease related, may need to be rebuilt. Double-check your Custom Control macros too!
What are you waiting for?
Enjoy your free Synergy tune-up!
Please note: If you have the Squeeze & Tease 3D option installed, you must upgrade your 3D software after you upgrade your switcher software.
Latest Version
If you are using a USB key:
The USB key will contain all of the files required to fully upgrade your switcher, including the latest version of Squeeze & Tease 3D software and 3D Wipes and Sequences.
If you are using 3.5” floppy disks:
This disk will contain the necessary files to upgrade the Synergy software. If your switcher has the Squeeze & Tease 3D option installed, proceed to the "Squeeze & Tease 3D Option" section below.
Vintage Software
Squeeze & Tease 3D Option
Please note that the 3D software must be upgraded after you have upgraded your switcher to version 11.
Latest Version
Unzip content on a floppy disk
Vintage Software
For owners of the S&T 3D DVE option, a set of pre-programmed S&T 3D Wipes and Sequences is available. These files contain all of our most popular sequences and wipes. To use these files, you must be running both S&T 3D and switcher software version 11 or later.
Latest Version
Wipes and Sequences
Vintage Software
¬ Product Overview
¬ Executive Overview
¬ Top Reasons to Buy
¬ Features
¬ Support
¬ Software Downloads
¬ button Inserts