Digital Production Switchers - Synergy 4 SD
From time to time, we release new Synergy software with cool new features. Simply follow the links at the bottom of the page to download the latest version - free.
Each software upgrade package contains:
- Software Upgrade files
- An Upgrade Instructions.pdf that gives detailed step-by-step instructions and change information.
If you don't have a copy of Acrobat Reader, we can email or fax you the information before you proceed.
Along with your new software, you may want new manuals. They are available upon request and can be ordered in one of two forms - a printed copy is available at standard prices, but if you'd prefer a .pdf electronic copy, a complimentary version on CD is available. For CD copies, a small shipping and handling charge will apply. In either case, to order your new manuals contact Ross Video Technical Support via email at techsupport@rossvideo.com, by telephone at (613)652-4886, or by fax at (613)652-4425.
Note: DON'T START THE UPGRADE PROCESS AN HOUR BEFORE YOU NEED TO GO TO AIR, if at all possible. While we've made every effort to make the process smooth and maintain compatibility, we may have "tweaked" a feature that you use. Leave time to verify that your installation and memories are still working the way you intended. Some effects, especially Squeeze & Tease related, may need to be rebuilt. Double-check your Custom Control macros too!
What are you waiting for?
Enjoy your free Synergy tune-up!
Please read the Upgrade Instructions carefully before beginning your upgrade.
Synergy 2, 3, or 4 software upgrades all use the same code packages.
This upgrade process assumes you are running software version 2.05 or later. If you have an earlier version of software, hardware reconfiguration may be required. Please contact Ross Video Technical Support for special instructions.
Please note: If you have the Squeeze & Tease 3D option installed, you must upgrade your 3D software as well. The 3D software must be upgraded after you have upgraded your switcher software.
OverDrive Version Compatibility Matrix
OverDrive |
Synergy |
iNEWS |
ENPS |
MOS |
v1.x |
v14.x |
NA |
v4.0/4.5 |
v2.6 |
v2.x |
v15.x |
v2.0 |
v4.0/4.5 |
v2.6 |
v3.x / v4.x |
v16.x |
v2.0 |
v4.0/4.5 |
v2.6/2.8 |
v5.x |
v17.10 |
v2.x |
v4.x/5.0 |
v2.6/2.8 |
Latest Version
Please note: We have two versions of current software. Each version is used with a different issue level of control panel CPU Board. To check the version of the CPU Board in your Synergy control panel, using the menu system:
- Navigate to the Installed Options Menu by pressing HOME, MORE, Setup, Installed Options, and Panel Boards to display the Panel Boards Menu.
- Locate the 4000-033 Panel CPU in the Board column.
- Locate the issue number of the board in the Rev column.
**For control panel CPU Board Issue 10b or higher** |
If you are using a USB key:
The USB key will contain all of the files required to fully upgrade your switcher, including the latest version of Squeeze & Tease 3D software and 3D Wipes and Sequences, and the latest version of the Dual Aspectizer software.
If you are using 3.5” floppy disks:
These two disks will contain the necessary files to upgrade the Synergy software. If your switcher has the Squeeze & Tease 3D option and/or the Dual Aspectizer Option installed, proceed to the appropriate section(s) below.
**For control panel CPU Board revisions lower than Issue 10b** |
Vintage Software
Squeeze & Tease 3D Option
Please note that the 3D software must be upgraded after you have upgraded your switcher to version 15.
Latest Version
**For control panel CPU Board Issue 10b or higher** |
**For control panel CPU Board revisions lower than Issue 10b** |
Vintage Software
For owners of the S&T 3D DVE option, a set of pre-programmed S&T 3D Wipes and Sequences is available. These files contain all of our most popular sequences and wipes. To use these files, you must be running both S&T 3D and switcher software version 11 or later.
Latest Version
**For control panel CPU Board Issue 10b or higher** |
Wipes and Sequences
**For control panel CPU Board revisions lower than Issue 10b** |
Wipes and Sequences
Vintage Software
-
S&T v15.02 3D Wipes and Sequences
(For control panel CPU Board Issue 10 or higher)
Aspectizer Software Upgrades
Latest Version
v2.10