Simple, familiar configuration paired with sophisticated discovery and registration makes adding IP into systems straightforward.
SIMPLE PORT SETUP
Ultricore permits users to quickly set up ports for all of the Ultrix-IP- IO boards. Set communications, ranges of IP addresses or set to DHCP, and set up redundant/non redundant ports from one screen.
CREATE SENDERS & RECEIVERS
Ultricore provides several ways to create senders and receivers on each port. You can set IP addresses, signal formats, and channel counts manually, or use the default builder to quickly allocate an entire port. Bandwidth state and alarms are readily accessed from the same page.
POWERFUL IP NETWORK DISCOVERY
With the Ultricore IP license, users can discover their entire network using NMOS IS-04/05 registration and discovery. All devices are added to the Ultricore ports list to allow for control from common hardware and software control surfaces.