Give Your Products the Freedom and Power to Perform Across Markets
AES67 / Dante-SAP / RAVENNA / ST2110 / NMOS / Livewire+, in one package.
Give your product the freedom to perform throughout the many applications of audio networking protocols. The BACH-openModule is a full-featured solution for easy integration of most AES67-based control systems including Dante / RAVENNA / NMOS / Ember+ / LW+, all while protecting your investment from coming shifts in audio networking standards.
The BACH-openModule delivers unequalled performance with up to 512×512 channels of audio, latency is unrivalled at 125 µs, and glitchless stream redundancy is always on without any compromise to channel count using dual-Gigabit Ethernet audio-over-IP interfaces.
ROSS’ comprehensive Product Development toolkit (PDK), complete with software and FPGA development tools, streamlines integration, dramatically lowering time to market and total-system-cost. The onboard dual-core ARM Cortex-A9 MPU includes its own Linux environment, enabling the development of custom embedded applications and FPGA cores for custom audio interfaces or processing.
The BACH-openModule is offered in the following software-defined configurations:
|ORDERING CODE||DESCRIPTION||CUSTOMIZABLE||MAX AUDIO CHANNELS||MAX AUDIO STREAMS||NETWORK REDUNCANCY||AUDIO I/O|
|COV-BACH-OM512||Highest Capacity||SDK||512||64+64||Stream & Dual GE PHY||16+16 x I16S|
|COV-BACH-OM256||High Performance||SDK||256||32+32||Stream & Dual GE PHY||8+8 x I32S|
|COV-BACH-OM128||Lowest System Cost||SDK||128||32+32||Stream & Dual GE PHY||8+8 x I16S|
|COV-BACH-OM-PDK||Customizable openModule||FPGA & SDK||64||8+8||Stream & Dual GE PHY||8+8 x I8S|
|System on Module||Full Integrated with SoC FPGA and Memories|
|Network Transport||AES67 and ST2110-30/3|
|Max. Channels per Direction||512|
|Streams per Direction||64|
|Channels per Stream||1 to 80|
|Sample Rate||44.1/88.2kHz and 48/96kHz|
|Audio Encoding||L16, L24, L32 (16, 24 and 32bit) & AM824 for AES3 transparent transport|
|Glitchless Redundancy||Port and Stream, per ST2022-7|
|Packet Time / Latency||125μs, 250μs or 1ms|
|Network I/O||3x RGMII|
|Programmable TDM I/F||I2S, I8S, I16S, I32S|
|AES10/MADI||LVDS with full duplex 64ch MADI|
|Control I/O||UART, SPI & I2C|
|Discovery & Registration||Dante/SAP, RAVENNA, NMOS IS-04 & Livewire1|
|Connection Control||JSON API, NMOS IS-05, EmBER+ & Livewire1|
|Telemetry & Configuration||JSON API, CLI & Livewire1|
|Mechanical Specifications||68mm x 65mm, SODIMM edge connector|
|Upgrades||Future ready via in-system upgrades|
|Customization||Available Software and FPGA Development Kits|
1 Note that NMOS, EmBER+ and Livewire+ will not be fully supported on first software release. Please contact us for more details.
The BACH openModule PDK (Product Development Kit) has all you need to quickly evaluate and understand how to integrate Ross Video’s BACH openModule AES67 & ST2110 technology into your products.
The BACH Virtuoso Audio-over-IP PDK (Product Development Kit) has all you need to quickly evaluate and understand how to integrate Ross Video’s BACH technology into your products.
BACH Virtuoso features various audio and control interfaces for easy evaluation of the above products:
BACH Virtuoso Audio-over-IP PDK also offers schematics and documents to guide your integration of BACH into your products.
Try our BACH technology today with our existing openModule development board.
|COV-BACH-OM512||BACH openModule 512×512 System on Module (SOM)
Coming Soon – Contact email@example.com for details.
|COV-BACH-OM256||BACH openModule 256×256 System on Module (SOM)|
|COV-BACH-OM128||BACH openModule 128×128 System on Module (SOM)|
|COV-BACH-VIRTUOSO-PDK||BACH Virtuoso Audio-over-IP Product Development Kit, with BACH Liberty, BACH openModule, and BACH Minuet|
|COV-BACH-OM-EVAL-AES67||BACH openModule development kit with AES67 firmware|
|COV-BACH-OM-PDK||Product Development Kit for Customizable BACH openModule, includes Software and FPGA Development Kits|
|COV-BACH-OM-SDK||BACH openModule Software Development Kit|
The first step is a consultation with a member of our sales team or one of our certified Ross resellers to discuss the specific needs of your organization. Next, we will look for a mutually convenient opportunity to coordinate a demo.