Specifications

STANDARD FEATURES
Solid-State programmable audio and video delay
Video Defocus Concealment
Audio Jumble Concealment
Non-Volatile User Setup Memories
Auto Bypass upon: Power Loss | Catastrophic Failure
HD Video Standards & Optional UHD-4K Video Standards
Dual 100G QSFP Cages for Optional SMPTE-2110p I/Os
16-Track Embedded Digital Audio on SDI I/Os
16-Track AES Digital Audio I/Os on TASCAM DIGITAL D25
GPI I/O for Control Panel & Tally
Hot-Swap Redundant Power Supplies
OPTIONAL FEATURES
AirCleaner Hardware Control Panel
UHD-4K 2160p Video Standards: Software License*
SMPTE-2110 IP Audio-Video I/Os: Software License**
SUPPORTED VIDEO STANDARDS(All: HDR & WCG capable with 10-Bit Sources)
Via HD-SDI 1.5Gb/s| 720p50 | 720p59.94 |
| 1080psf23.98 |
| 1080p23.98 | 1080p24 | 1080p25 | 1080p29.97 | 1080p30 |
| 1080i50 | 1080i59.94 |
Via HD-SDI 3Gb/s| 1080p50 | 1080p59.94 | 1080p60 |
Via UHD-SDI 12Gb/s (Optional)| 2160p50 | 2160p59.94 | 2160p60|
DIGITAL VIDEO INPUT [PGM IN](QTY 1) Female HD-BNC
(QTY 2) 100G QSFP Transceiver Cages
(Cages used for all SMPTE-2110 IP I/Os)**
HD 720p | HD 1080iHD-SDI: SMPTE 292M (1.5 Gb/s @ 10-Bits)
HD 1080pHD-SDI: SMPTE 424M (3.0 Gb/s @ 10-Bits)
UHD-4K 2160p (Optional)UHD-SDI: SMPTE 2082 (12.0 Gb/s @ 10-Bits)
IP Video Input (Optional)SMPTE 2110
DIGITAL VIDEO INPUT [AUX IN](QTY 1) Female HD-BNC
(QTY 2) 100G QSFP Transceiver Cages
(Cages used for all SMPTE-2110 IP I/Os)**
HD 720p | HD 1080iHD-SDI: SMPTE 292M (1.5 Gb/s @ 10-Bits)
HD 1080pHD-SDI: SMPTE 424M (3.0 Gb/s @ 10-Bits)
UHD-4K 2160p (Optional)UHD-SDI: SMPTE 2082 (12.0 Gb/s @ 10-Bits)
IP Video Input (Optional)SMPTE 2110
DIGITAL VIDEO OUTPUT [PGM OUT](QTY 1) Female HD-BNC
(QTY 2) 100G QSFP Transceiver Cages
(Cages used for all SMPTE-2110 IP I/Os)**
HD 720p | HD 1080iHD-SDI: SMPTE 292M (1.5 Gb/s @ 10-Bits)
HD 1080pHD-SDI: SMPTE 424M (3.0 Gb/s @ 10-Bits)
UHD-4K 2160p (Optional)UHD-SDI: SMPTE 2082 (12.0 Gb/s @ 10-Bits)
IP Video Output (Optional)SMPTE 2110
DIGITAL VIDEO OUTPUT [TAP OUT](QTY 1) Female HD-BNC
(QTY 2) 100G QSFP Transceiver Cages
(Cages used for all SMPTE-2110 IP I/Os)**
HD 720p | HD 1080iHD-SDI: SMPTE 292M (1.5 Gb/s @ 10-Bits)
HD 1080pHD-SDI: SMPTE 424M (3.0 Gb/s @ 10-Bits)
UHD-4K 2160p (Optional)UHD-SDI: SMPTE 2082 (12.0 Gb/s @ 10-Bits)
IP Video Output (Optional)SMPTE 2110
EMBEDDED DIGITAL AUDIO INPUT & OUTPUT(ALL) SDI INPUT & OUTPUT HD-BNCs
Accommodates AC-3 and Dolby-E Compressed Bit Streams
[ PGM IN | AUX IN | TAP OUT | PGM OUT ]HD-SDI & UHD-SDI = 16-Tracks
AES DIGITAL AUDIO INPUT & OUTPUT(QTY 1) Female 25D [TASCAM DIGITAL/AES-59 Cabling pin-out]
Accommodates AC-3 and Dolby-E Compressed Bit Streams
[ PGM IN | AUX IN | TAP OUT | PGM OUT ]AES/EBU 48kHz @ 24-Bits
8-Tracks (4 Stereo pairs) IN
8-Tracks (4 Stereo pairs) OUT
ANALOG AUDIO MONITORING OUTPUT(QTY 1) Female 3.5mm
Selectable to monitor any “stereo audio pair” from PGM OUT
Unbalanced Line Level @ –10 dBV2-Tracks (1 stereo pair)
ANALOG REFERENCE INPUT(QTY 2) Female HD-BNC
Tri-Level HD | Bi-Level Composite Analog SDLoop-Through
DATA / CONTROL
100/T Ethernet(QTY 1) Female RJ45
GPI I/O (Control Panel & Tally)(QTY 1) Female 9D
PHYSICAL & ELECTRICAL
2RU Chassis – DimensionsW = 17.0 in | H = 3.00 in | D = 23.60 in
W = 43.18 cm | H = 8.90 cm | D = 60.00 cm
2RU Chassis – Weight>27 lbs.
>12.25 kg.
Control Panel – DimensionsW = 6.35 in | H = 2.28 in | D = 3.78 in
W = 16.13 cm | H = 58.00 cm | D = 96.10 cm
Control Panel – Weight>3 lbs.
>1.36 kg.
2RU Chassis AC Power Input100 to 240 VAC | 8 to 4 Amps | 47 to 63 Hz
(Input Power Auto-Sensing)
2RU Chassis AC Power Consumption< 500W
SAFETY & EMISSIONS COMPLIANCE
IEC/EN 62368-1
FCC PART 15
ICES-003
CE DIRECTIVE 93/68/EEC
CISPR 32:2015 | AMD1:2019
MODELMaximum Delay Time in Seconds for 59.94 video frame rate
720p | 1080i1080p2160p
AirCleaner-2 Model-A80s40s10s
AirCleaner-2 Model-B160s80s20s
AirCleaner-2 Model-C360s180s45s

* Optional 2160p UHD-4K Video Standards consists of a one-time license installed over the internet; or installed at time of initial purchase of AirCleaner-2.
** Optional SMPTE-2110 IP Video IOs consists of a one-time license installed over the internet; or installed at time of initial purchase of AirCleaner-2; requires installation of customer-supplied (QTY 2) QSFP 100G transceivers into AirCleaner-2 chassis, purchased separately from a range of third-party vendors.