TSI-100 Transport Stream Identifier

TSI-100

Transport Stream Identifier

Monitor and signal a remote device when an incorrect transport stream or no transport stream is present.

Overview
Features
Diagrams
Ordering information
Downloads

The TSI-100 monitors the ASI transport stream and provides a GPI/O output when the TSID is not correct. This signal may be used to control other devices or to signal the fault.

The TSI-100 is ideally suited for use in remote television broadcast translators to mute or power off the re-transmitter when the main broadcast goes off the air. It may also be used in a cable head-end for the same purpose.

Features

  • Verify transport stream is correct by inspecting its TSID
  • GPI/O output to signal a problem or control another device
  • Ideal for muting translators when main transmitter is off air
  • Connection for both normally open and normally closed operation
  • 5-year transferable warranty

The TSI-100 provides remote control of:

  • Transmitters in a translator
  • Cable head-end channel input equipment
  • Signals a remote device or alarm when an incorrect transport stream or no transport stream is present
  • Simple setup, enter the TSID of the transport stream
  • 2 GPI/Os provide both normally open and normally closed signaling
  • Unattended operation, set it and forget it

R2D

Transport Stream Identifier
TSI-100 
Transport Stream Identifier

Rear Module Suffix (ex: [model]-R2)
-R2D Rear Module w/ Dry Contact Relays
for TSI-100

 

openGear Manuals Download
Cut Sheet Download
Catalog Download
Related Products

    AAP-8644

    Advanced Audio Processor

    Audio loudness processor with Linear Accoustic AEROMAX™.

    openGear,Processing and Monitoring

    AVS-8764

    AES / Analog Video Dual 2×1 or 4×2 Switch

    A convenient and economical solution for systems that require switching of up to 4 input AES audio signals or analog video sources, to 1 or 2 outputs.

    openGear,Processing and Monitoring

    DSS-8224

    Dual 2×1 or 4×2 HD / SD SDI Switch

    A convenient and economical solution for systems requiring switching of up to 4 input video sources, SDI and / or HD SDI, to 1 or 2 outputs.

    openGear,Processing and Monitoring

    GPI-100

    Remote GPI VANC Transmission

    Encodes or decodes up to 8 GPIs as VANC packets.

    openGear,Processing and Monitoring

    LDP-8242

    HD / SD SDI Loudness Processor

    Audio loudness processor with Linear Accoustic AEROMAX™.

    openGear,Processing and Monitoring

    NWE-3GA

    Nielsen Watermarks Encoder

    High quality insertion of Nielsen Watermarks into embedded and / or AES3 digital audio.

    Nielsen,openGear,Processing and Monitoring

    QSP-8229A

    Quad Split

    A single modular card that fits inside the openGear signal processing platform for viewing up to 4 inputs on a single display.

    openGear,Processing and Monitoring

    RCM-8120

    Remote Control Modules

    Remote control modules offer standard GPI/O interfaces to control most GPI/O enabled devices, as well as a logic control signal for use with the DSS-8224 Digital Video Switch and the AVS-8764 AES / Analog Video Switch.

    openGear,Processing and Monitoring

    TSD-100

    Transport Stream Detector

    Detect and monitor up to 8 PIDs assigned to SCTE-35 triggers and signal external devices with GPI/O.

    openGear,Processing and Monitoring

    TSI-100

    Transport Stream Identifier

    Monitor and signal a remote device when an incorrect transport stream or no transport stream is present.

    openGear,Processing and Monitoring

    TSM-100

    Transport Stream Monitor

    MPEG transport stream monitoring with GPI/O alarming.

    openGear,Processing and Monitoring