CWDM Coarse Wave Division Multiplexing

CWDM

Coarse Wave Division Multiplexing

Up to 16 channels of bit rate independent signals transmitted on a single fiber using wavelength division multiplexing.

CWDM Optical MUX / DEMUX
Three sets of MUX / DEMUX modules are available: a 4 channel with expansion port, an 8 channel, and an 8 channel with expansion port. Using individual, or a combination of modules, allow for the creation of 4, 8, 12, or 16 channel systems. Modules with expansion ports enable the use of existing non-CWDM 1310nm lasers to create 5, 9 and 13 channel systems.

Wavelength MUX / DEMUX modules use passive wavelength filters. The modules fit the OG3-FR frame but draw no power. With no active components, modules offer a very high level of reliability.

CWDM Transmitters and Receivers
Wave division multiplexing allows the use of multiple wavelengths of light on a single fiber, therefore allowing a single fiber to carry multiple signals.

Each signal can run at its own bit rate and protocol, independent for the other signals. Each electrical signal to be multiplexed into the final output must be converted to an optical signal with a unique wavelength by using different lasers on the transmitter. All Ross openGear® fiber transmitters have the option for CWDM output. The FDT-6604 dual electrical to optical transmitter comes in 8 product variants, utilizing DFB optical SFPs, with each card transmitting two neighboring wavelengths. The FST-6602 single transmitter, MUX-6258 audio mux and Ethernet products come in 16 different product variants. CWDM products are identified by a two digit suffix, which identifies the lower wavelength.

For example, dual channel products like the FDT-6604-27 will transmit 1270nm on its first channel, and 1290nm on its second channel. Single channel products like the MUX-6258-55 will output 1550nm.

Optical to electrical converters use a wide spectrum optical receiver, and will work with any wavelength. All optical to electrical converters are wide spectrum receivers and will function within a CWDM system, regardless of the transmitted wavelengths.

  • Passive CWDM optical MUX and DEMUX modules contain no active components and offer very high reliability
  • Optical output connection: LC / UPC
  • Supports single-mode fiber
  • Expandable from 4 or 8 to 12 or 16 channel systems
  • Latching rear module to prevent accidental removal
  • Fits openGear frame, passive modules do not require any power
  • 5-year transferable warranty

Multiplexing / De-Multiplexing
FCM-6844 4 CH Optical MUX w/ Expansion Port
FCD-6845 4 CH Optical DEMUX w/ Expansion Port
FCM-6846 8 CH Optical MUX
FCD-6847 8 CH Optical DEMUX
FCM-6848 8 CH Optical MUX w/ Expansion Port
FCD-6849 8 CH Optical DEMUX w/ Expansion Port

Downloads

Related Products

FDT-9648-ST 3G / HD / SD Dual Channel Fiber Transmitter with ST optical connectors LEARN MORE
FDT-9648-LC 3G / HD / SD Dual Channel Fiber Transmitter LEARN MORE
FDR-9647-ST 3G / HD / SD Dual Channel Fiber Receiver with ST optical connectors LEARN MORE
FDR-9647-LC 3G / HD / SD Dual Channel Fiber Receiver LEARN MORE
FDB-9649-ST 3G / HD / SD Dual Channel Fiber Transceiver with ST optical connectors LEARN MORE
FDB-9649-LC 3G / HD / SD Dual Channel Fiber Transceiver LEARN MORE
Optical Splitters Single 1×2, 1×4, 1×8 and Dual 1×2, 1×4 Passive Optical Splitters LEARN MORE
FST-6602 Single Electrical to Optical Converter LEARN MORE
FSR-6605 Single Optical to Electrical Converter with Optical Regeneration LEARN MORE
FSR-6601 Single Optical to Electrical Converter LEARN MORE
FDT-6604 Dual Electrical to Optical Converter LEARN MORE
FDR-6603 Dual Optical to Electrical Converter LEARN MORE
CWDM Coarse Wave Division Multiplexing LEARN MORE
SHC-8932-F A low-latency UHD SDI to HDMI converter card for openGear LEARN MORE

Interested in more info? Send us a note!

We’ll put you in touch with a member of our team to discuss your specific needs.